Euroboor

Euroboor Extended* Two-Parts Ejection Pin (8 x 145mm) * Extended Pilot Pins: Specifically for use with long cutters and drilling in verythick workpieces.Makes it possible to continue drilling without...

Euroboor TCT Annular Cutter 55mm Depth Euroboor Tungsten Carbide Tipped Annular cutters are equipped with a spiral flute which creates optimum chip removal and seizure is virtually impossible. Used...

Euroboor Extended* Ejection Pin (6.35 x 155mm) * Extended Pilot Pins: Specifically for use with long cutters and drilling in verythick workpieces.Makes it possible to continue drilling without...

Euroboor Ejection Pin (8 x 162mm) Suits Euroboor HSS Metric - 100mm HCX Series cutters 61mm+ diameter Length: 162mm Diameter: 8mm • Precise positioning  • Locks off...

Euroboor Extended* Ejection Pin (6.35 x 177mm) * Extended Pilot Pins: Specifically for use with long cutters and drilling in verythick workpieces.Makes it possible to continue drilling without...

Euroboor Extended* Ejection Pin (6.35 x 204mm) * Extended Pilot Pins: Specifically for use with long cutters and drilling in verythick workpieces.Makes it possible to continue drilling without...

The Euroboor HSS Annular Cutters are a heavy industrial grade cutter with no compromises. • Multi fitting shank will fit Almost all machines. • Alternate teeth geometry ensures an accurate and burr...

The Euroboor HSS Annular Cutters are a heavy industrial grade cutter with no compromises| Multi fitting shank will fit Almost all machines| Alternate teeth geometry ensures an accurate and burr free...

The Euroboor HSS Annular Cutters are a heavy industrial grade cutter with no compromises| Multi fitting shank will fit Almost all machines| Alternate teeth geometry ensures an accurate and burr free...

The Euroboor HSS Annular Cutters are a heavy industrial grade cutter with no compromises| Multi fitting shank will fit Almost all machines| Alternate teeth geometry ensures an accurate and burr free...

The Euroboor HSS Annular Cutters are a heavy industrial grade cutter with no compromises| Multi fitting shank will fit Almost all machines| Alternate teeth geometry ensures an accurate and burr free...

• HSS, 19.05mm (3/4”) Weldon shank • Sizes 6, 7, 8, 9, 10, 11mm • 30mm length  

• HSS, 19.05mm (3/4”) Weldon shank • Sizes 6, 7, 8, 9, 10, 11mm • 50mm length

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 50mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

Fits directly into Magnetic Drill weldon shank, no chuck required. Machined from one solid blank, no weak spots caused by inferior material or welds. 30mm depth.

HSS. 3/4" Weldon Shank. 3 cutting edges. 90 degree.

HSS. 3/4" Weldon Shank. 3 cutting edges. 90 degree.

HSS. 3/4" Weldon Shank. 3 cutting edges. 90 degree.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Weldon drill tap combination. 2 tools in 1. M35 5% Cobalt, with black oxide coating. Applications include steels, castings and forgings. Fits directly to Euroboor Mag drills.

Size: M4 x 0.7 DIN 371 Made in The Netherlands

Size: M5 x 0.8 DIN 371 Made in The Netherlands

Size: M6 x 1.0 DIN 371 Made in The Netherlands