VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm

SKU:
301125-0050
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm
  • VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm

Also Available:

Also Available:

Description

VersaDrive® Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance. VersaDrive® Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2” drill chuck for cordless or Pistol Drills or used with a VersaDrive® Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Recommended for use with Impact Drivers for high drilling and tapping productivity. • Impact Chipbreaker action for effective swarf evacuation • Drill pilot holes and then tap in one fast easy operation • Ground flute twist drill creates the correct pilot hole size • Rated for material thickness no greater than the diameter of the drill-tap • Industrial grade Titanium Nitride coating reduces heat buildup and burn-out • Use on Impact to prevent dangerous kickback caused by handheld rotary tools • Heavy-duty hex shank design for secure non-slip operation • Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods Rated up to 12mm thick steel For fastest performance use on impact wrenches & impact drivers Check minimum torque requirement Up to M10 (3/8") can also be used on cordless drills Tap the hole in one pass where possible, applying adequate lubrication before you start Laser cut holes & Stainless Steel require higher torque Use appropriate lubrication and correct RPM to achieve long tool life
View AllClose

Additional Information

BIN:
04.16
View AllClose